- FSP Champ Rack Series is the high density version of double-conversion online UPS with a output power factor 0.9. - It’s designed in small cabinet with microprocessor controller. - It also has USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relate contact cards. Specifications - Topology: On-line Single Phase - Capacity: 1000VA/900W - Typical Recharge Time (up to 90% capacity): 4 hours - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 40Hz ~ 70Hz - Input Voltage Range: 120-300 VAC - Output Outlet: IEC*3 - Output Voltage: ± 1% (Batt. Mode) - Output Frequency Range: 47.5 Hz ~ 52.5 Hz or 57Hz ~ 63 Hz (Synchronized Range) 50 Hz ±0.25 Hz or 60 Hz ±0.3 Hz (Batt. Mode) - Wave Form: Pure Sinewave - Battery: 2pcs 12V 9Ah inside - Battery Type Number: 12V / 9Ah x 2 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Network Ports: USB, RS-232 - Operating Environment / Humidity: 20-90 % RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB 1 Meter - Dimensions: 282 x 145 x 220 - Weight: 9 800g - OS: Supports Windows® 98/XP/2000/Vista/7/8/10, Windows® Server 2000/2003/2008/2012/2016, Linux, and MAC

- The iFP series is equipped with automatic voltage regulation to reduce the impact of unstable voltage on equipment. - The intelligent UPS’ functions can also provide power during outages, and the battery automatically charges when power is restored. - FSP’s intelligent UPS can provide equipment with an uninterrupted supply of power at any time. Features - LCD touch screen - USB communication port - RJ45 surge protection - Compact size - Excellent microprocessor control for high reliability - Boost and buck AVR for voltage stabilization - Auto restart while AC is recovering - Simulated sine wave - Off-mode charging - Cold start function Specifications - Input Capacity: 2000 VA / 1200 W - Input Voltage Range: 220/230/240 VAC - Input Frequency Range: 60/50 Hz (auto sensing) - Output AC Voltage Regulation: ±10% - Output Frequency: 60 Hz or 50 Hz ±1 Hz - Output Waveform(Batt. Mode): Simulated Sinewave - Transfer Time: Typical 2-6 ms - Battery Type Number: 12 V/9 Ah, 2 - Battery Typical Recharge Time: 4-6 hours recover to 90% capacity - Weight: 11 000 g - Noise: Less than 40dB - Dimensions(L x W x H): 320 x 130 x 182 mm - Humidity: 0-90 % RH @ 0- 40°C (non-condensing)

Main characteristics FULL POWER PROTECTION - Electrical noise suppression, voltage and overvoltage peak suppression, autonomy, are common requirements to many UPS types - This UPs provides a wider voltage range capability, in addition to the aforementioned characteristics - Within this wide voltage range, the load is supplied without any support from the battery - This feature not only protects your computer, but also improve and increases battery lifetime COLD START FUNCTION (DC START) - All NEMO2.0 models are equipped with cold start function, which means that even if the power supply is unplugged, the UPS can be activated simply by pushing the ON / OFF switch and will operated supplied by the battery AUTORESTART - Upon returning the Mains, the UPS will restart automatically OVERLOAD PROTECTION - The internal microprocessor controls the load status in any operating conditions - In the event of overload or short circuit, your UPS will beep or will automatically turn off to avoid undesired damage to the load MODEM CONNECTION AND PROTECTION - Two special connectors RJ45/RJ11, will protect your Modem or your LAN 10Base-T network from any noise generated by the phone line POWER MANAGEMENT SOFTWARE - NEMO2.0 series includes UPSilon software that enables communication between the UPS and a PC. By connecting the USB port of the UPS to a corresponding PC port, you can either check or do the following: * to control UPS and battery status * to save vital files during unattended shutdown * to plan Turn off and Turn on of the UPS for energy saving * to Log the UPS activities and status for checking them over the time - All controls are performed and guaranteed by a high reliability microprocessor - "Green Power" function for energy saving - Light weight and compact dimensions Specifications INPUT - Input Voltage: 220-230-240Vac - Input voltage range: 162-290Vac - Frequency: 50/60Hz (auto selection) OUTPUT - Output Voltage: 230Vac - Voltage tolerance: +/-10% - Frequency: 50/60Hz (following input frequency) - Power: 2000VA - Active Power: 1000W - Switching time: 2-6 mS tpc - IEC outlet: 2 - Schuko outlet: 2 NOISE FILTERING - Modem / T port (10BaseT/100baseT): RJ11/RJ45 (network compatible) BATTERY - Typ. Autonomy time: 10 min - Battery capacity: 2× 9Ah - Type: Maintenance-free, sealed lead-acid - Recharging time: 6-8 hr at 90% after a deep discharge PROTECTION - Overvoltage/Undervoltage: Switch to "Battery mode" - Overload/Shortcircuit: Fuse and Electronic threshold (both on "Mains mode" and on "Battery mode") MECHANICAL CHARACTERISTICS - Dimensions (W×D×H): 158×380×198 mm - Weight: 10 kg ENVIROMENT - Ambient: Temperature 0C to 40C, Humidity 0-90% without condensation, altitude max. 3000 mt. - Audible noise: < 40dbA (measured at 1mt.) both on "Mains mode" and on "Battery mode" STANDARD - IEC/EN62040-1 IEC/EN62040-2 IEC/EN62040-3 IEC/EN60950-1

- FSP Champ Rack Series is the high density version of double-conversion online UPS with a output power factor 0.9. - It’s designed in small cabinet with microprocessor controller. - It also has USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relate contact cards. Specifications - Topology: On-line Single Phase - Capacity: 1000VA/900W - Typical Recharge Time (up to 90% capacity): 4 hours - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 40Hz ~ 70Hz - Input Voltage Range: 120-300 VAC - Output Outlet: 3 schuko - Output Voltage: ± 1% (Batt. Mode) - Output Frequency Range: 47.5 Hz ~ 52.5 Hz or 57Hz ~ 63 Hz (Synchronized Range) 50 Hz ±0.25 Hz or 60 Hz ±0.3 Hz (Batt. Mode) - Wave Form: Sine wave - Battery: 2pcs 12V 9Ah inside - Battery Type Number: 12V / 9Ah x 2 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Network Ports: USB, RS-232 - Operating Environment / Humidity: 20-90 % RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB 1 Meter - Dimensions: 310x438x88 - Weight: 1200g - OS: Supports Windows 98/XP/2000/Vista/7/8/10, Windows Server 2000/2003/2008/2012/2016, Linux, and MAC

- Single-phase uninterruptible power supplies - On-line double conversion with DSP tecnology (Digital Signal Processor) - MISSION UPS is equipped with a LCD display to shows all parameters (more than 50 items), and is possible to set the most basic configurations directly on LCD display - MISSION is a compact UPS, and can be used for all kind of applications - It is a true on-line transformerless UPS, double conversion technology, single phase - It includes a maintenance bypass (6KVA and 10KVA models), and it is possible to increase the back-up time by adding battery packs - MISSION is the most suitable product for critical loads - It has 0 ms switching time and guarantee a perfect protection for all applications requiring an input voltage without disturbances and no interruptions - A PF at 0.9 and DSP technology (Digital Signal Processor) it provides high output efficiency for all kind of loads Features - High input and output PF - Wide input voltage range (energy saving) - Eco Mode (Economic operation mode) - Back feed protection and Surge Protection - Auto self test - Cold Start - Parallel operation capability - Output By-pass - Additional battery pack - USB - EPO - Software included - Intelligent Slot SNMP board (optional) - Dry contact (optional) Specifications - Nominal Power: 1000 VA / 900 W - Input: Single-phase + GND - Voltage Range: * 115 +/- 5VAC * 295 +/- 5VAC - Frequency Range: * 45Hz-55Hz@50HZ * 55Hz-65Hz@60HZ - Power Factor: =>0.98 - ECO interval: Output voltage +/- 20 VAC - Bypass range: 186 VAC - 252 VAC - THDi: <=7% (100% non linear load) - Connection: 1× IEC - Output: Single-phase + GND - Nominal Voltage: 208/220/230/240 VAC - Power Factor: 0.9 - Voltage tolerance: +/- 2% - Frequency: * Normal operation: When input frequency is within its range, then output frequency is the same than input; When input frequency is out of its range, then output frequency is (50/60 +/-0.2)Hz, which is the same as in battery mode * Battery operation: (50/60 +/-0.2)Hz - Crest Factor: 3:1 - Switching time: Rete - battery = 0ms - Overload: * Battery operation: ** 108% +/-5% < load <= 150% +/-5% >30s output shutdown and signal ** 150% +/-5% < load < 200% +/-5% >300ms output shutdown and signal * Normal operation: ** 108% +/-5% < load <=150% +/-5% >30s switch to bypass and signal ** 150% +/-5% < load <200% +/-5% >300ms switch to bypass and signal - Efficiency: * Normal operation: 100% of load =>88% * Battery operation: 100% of load =>85% * ECO: 100% of load =>94% - Output voltage distortion: * <= 3% (100% linear load) * <= 5% (100% non linear load) - Outlet type: 2× IEC, 1× Schuko - Input battery voltage: 24 VDC - Number of internal batteries: 2 - Type of battery: 12V/7AH battery maintenance-free, sealed lead acid (referred to UPS standard only) - Autonomy time: Full load =>4min (referred to UPS standard only), for long autonomy times models, the autonomy is defined by the battery capacity - Recharge current: 1A - Environmental conditions: * Temperature: 0°C - 40°C (battery excluded) * Humidity: 0 - 95% whitout condensation * Max Operating altitude: < 1500m; if >1500m, output power reduced - Storage temperature: -25°C - 55°C (battery excluded) - Dimensions (W×D×H): 144×368×215 mm - Weight: 9.7 kg

- FSP Champ Tower Series is the high density version of double-conversion online UPS with a output power factor 0.9. - It’s designed in small cabinet with microprocessor controller. - It also has USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relate contact cards. Specifications - Topology: On-line Single Phase - Capacity: 2000VA/1800W - Typical Recharge Time (up to 90% capacity): 4 hours - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 40Hz ~ 70Hz - Input Voltage Range: 120-300 VAC - Output Outlet: IEC*4 - Output Voltage: ± 1% (Batt. Mode) - Output Frequency Range: 47.5 Hz ~ 52.5 Hz or 57Hz ~ 63 Hz (Synchronized Range) 50 Hz ±0.25 Hz or 60 Hz ±0.3 Hz (Batt. Mode) - Wave Form: Pure Sinewave - Battery: 4pcs 12V 9Ah inside - Battery Type Number: 12V / 9Ah x 4 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Network Ports: USB, RS-232 - Operating Environment / Humidity: 20-90 % RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB 1 Meter - Dimensions: 397 x 145 x 220 - Weight: 17 000g - OS: Supports Windows 98/XP/2000/Vista/7/8/10, Windows Server 2000/2003/2008/2012/2016, Linux, and MAC

- FSP Custos 9X+ Series is ideal for medium-density power protection demand. It provides Rack/Tower to be fit in diverse environment. Despite its compact footprint, Custos 9X+ incorporates internal battery packs which can be accessed via front panel for easy maintenance. IT personnel can manage equipment well from learning intuitive information via LCD display. The application is suitable for networking, telecom, server and mission/critical applications. Features - Capacity: 1000VA/900W - Power Factor (PF): 0.9 - Wave Form: Sine wave - Battery: 12V/9Ah, 2pcs inside - Intelligent Slot: SNMP, AS400, RS485-Modbus - Port for External Battery Pack: Yes - Network Ports: USB, RS-232, EPO - Box contents: UPS, user manual, software CD, EU cable, USB cable, tower stands, mounting ears screws Specifications - MODEL: Custos 9X+ 1K - CAPACITY: 1000 VA / 900 W - PHASE: Single phase with ground INPUT - Voltage Range: • 110-300 VAC ± 5 % at 50% load; • 160-300 VAC ± 5 % at 100% load - Nominal Voltage: 200/208/220/230/240 VAC - Frequency Range: 40Hz~70Hz - Power Factor: ? 0.99 Nominal Voltage (100% load) - Harmonic Distortion (THDi): ? 5% nominal input voltage OUTPUT - Output Voltage: 200/208/220/230/240 VAC - AC Voltage Regulation (Batt. Mode): ± 1% - Frequency Range (Batt. Mode): 50 Hz or 60 Hz ± 0.1 Hz - Transfer Time: Zero - Waveform (Batt. Mode): Pure Sine Wave - Current Crest Ratio: 3:1 (max.) - Harmonic Distortion: ? 2% THD (Linear Load); ? 4% THD (Non-linear load) - Frequency Range (Synchronized Range): 57~63 Hz or 47~53 Hz or EFFICIENCY - Battery Mode: 85% - ECO Mode: 97% - AC Mode: 90% BATTERY - Battery Type: 12 V / 9 AH - Charging Current (max.): 1.5 A - Charging Voltage: 27.4 VDC ± 1% - Numbers: 2, 3 - Typical Recharge Time: 4 hours recover to 90% capacity INDICATORS - LCD Display: Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators ALARM - Battery Mode: Sounding every 5 seconds - Low Battery: Sounding every 2 seconds - Overload: Sounding every second - Fault: Continuously sounding ENVIRONMENT - Operating Humidity: 20~90% RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB 1 Meter PHYSICAL - Dimension, D X W X H (mm): 410 x 438 x 88 [2U] - Net Weight (kgs): 14.2 MANAGEMENT - Optional SNMP: Power management from SNMP manager and web browser - Smart RS-232/USB: Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8/10, Linux, and MAC

- Clippers series is a premium featured online double conversion UPS with Rack/Tower design and high efficiency to reduce customer‘s total cost of ownership. - The internal hot-swappable battery increases system reliability and reduces MTTR; the parallel function is designed for future equipment expansion. - Its special firmware design can adapt to various applications like laser printers and ultrasound devices and supports long backup time with battery monitoring. Features - True double conversion - Output power factor 1 - Rack/Tower 2 in 1 design with rotatable LCD - Super Charger up to 12A - Output voltage regulation < 1% - Higher output crest ratio 3:1 - 50Hz/60Hz frequency converter mode - Programmable power management outlets - Emergency power off function (EPO) - Hot-swappable battery design - ECO mode for energy saving - Support for laser printers and ultrasound systems - Full-time over-voltage cut-off and surge protection - High power factor charger with low ripple current - Low input THDi to reduce power system pollution - Adjustable charging current via LCD panel - Smart battery charger design to optimize battery performance - Genset compatible Specifications - Topology: On-line Single Phase - Capacity: 1000VA/1000W - Typical Recharge Time (up to 90% capacity): 3 hours - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 40Hz ~ 70Hz - Input Voltage Range: 160-300 VAC ±5% - Output Voltage: ± 1% (Batt. Mode) - Output Frequency Range: 46 Hz ~ 54 Hz or 56Hz ~ 64 Hz (Synchronized Range) 50 Hz or 60 Hz ±0.1 Hz (Batt. Mode) - Wave Form: Pure Sinewave - Battery: 12V/9Ah, 2pcs inside - Battery Type Number: 12V / 9Ah x 2 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Network Ports: USB, RS-232, EPO - Operating Environment / Humidity: 20-90 % RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB @ 1 Meter - Dimensions: 438 x 88 x 410 - Weight: 11 600g - OS: Supports Windows® 98/XP/2000/Vista/7/8/10, Windows® Server 2000/2003/2008/2012/2016, Linux, and MAC

- FSP Eufo Series rating is from 1.1KVA to 3.0KVA and implemented protect functions for power failures, surge overvoltage and brownout. - Rack Tower with easy-shift LCD design is flexible for installation. Moreover, this series built/in Efficiency corrective Optimizer (ECO) that the efficiency is up to 98% for more energy saving. - The application is suitable for networking, telecom, server and mission/critical applications. Features - Pure sine wave - Output power factor 0.9 - Excellent microprocessor control for high reliability - User-friendly and easy-shift LCD design - Boost and buck AVR for voltage stabilization - Programmable power management outlets - Emergency power off function (EPO) - Hot-swappable battery design - ECO mode for energy saving - Multiple communication available ( Rack/Tower 2 in 1 design with rotatable LCD ) Specifications - Topology: Single phase + ground - Typical Recharge Time (up to 90% capacity): 4 hours - Nominal Voltage: 208/220/230/240Vac - Capacity: 2000VA/1800W - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 50Hz / 60Hz - Input Voltage Range: 162-290 Vac - Output Voltage: 208/220/230/240Vac - Output Frequency Range: 50Hz / 60Hz ± 1Hz (Synchronized Range) 50 Hz or 60Hz ± 2% (Batt. Mode) - Wave Form: Sine wave - Battery: 12V/9Ah, 4pcs inside - Battery mode: 91% - Charging Current (max.): 1.5 A - Charging Voltage(Vdc±1%): 54.8 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Port for External Battery Pack: Yes - Network Ports: USB, RS-232, EPO - Operating Environment / Humidity: 0-90 % RH @ 0- 40°C - Noise Level: <45 dBA - Dimensions: 438x88x510 - Weight: 21 500g - OS: Supports Windows 2000/2003/XP/Vista/2008/7/8/10, Linux, and MAC Remark: - autonomy 3.2 min at 100% load Remark: - autonomy 3.2 min at 100% load

- FSP Champ Rack Series is the high density version of double-conversion online UPS with a output power factor 0.9. - It’s designed in small cabinet with microprocessor controller. - It also has USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relate contact cards. Specifications - Topology: On-line Single Phase - Capacity: 3000VA/2700W - Typical Recharge Time (up to 90% capacity): 4 hours - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 40Hz ~ 70Hz - Input Voltage Range: 120-300 VAC - Output Outlet: IEC*4 - Output Voltage: ± 1% (Batt. Mode) - Output Frequency Range: 47.5 Hz ~ 52.5 Hz or 57Hz ~ 63 Hz (Synchronized Range) 50 Hz ±0.25 Hz or 60 Hz ±0.3 Hz (Batt. Mode) - Wave Form: Pure Sinewave - Battery: 6pcs 12V 9Ah inside - Battery Type Number: 12V / 9Ah x 6 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Network Ports: USB, RS-232 - Operating Environment / Humidity: 20-90 % RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB 1 Meter - Dimensions: 421 x 190 x 318 - Weight: 27 600g - OS: Supports Windows 98/XP/2000/Vista/7/8/10, Windows Server 2000/2003/2008/2012/2016, Linux, and MAC

- UPServer 2.0 series is is the ultimate solution to protect Server and Data Center - It has an output power capability of 2000VA, which is suited to supply 90% of the critical loads in IT applications - It may be configured either in rack or tower version and is based on a On-Line double conversion DSP (Digital Signal Processor) technology - UPServer 2.0 may increase its autonomy time by adding battery packs - USB, RS232 communication ports and filtered RJ45 port are available by default - EPO contact is present by default, too. SNMP card and Realy card are available as option. Input and Output with IEC cables are connected for an easy and quick installation - UPServer 2.0 is the best cost effective solution for your IT system TECHNICAL DATA INPUT DATA - Power: 2000 VA / 1350W - Voltage: 230V - Selectable Input Voltage : 200V/208V/220V/230V/240V - Voltage range at 100% load: 160 - 290 Vac - Nominal Frequency: 50/60 Hz auto-sensing - Frequency range: 45–55Hz (50Hz)/55-65Hz (60Hz) before switching to battery - Bypass voltage range: * +5%,+10%,+15%,+25% (+25% by default) * -20%,-30%,-45%(-45% by default) - Battery Voltage: IEC320 C13-10A - Power UPS: IEC320 C14-10A OUTPUT DATA - Nominal value: 200/208/220/230/240V (programmable or auto-sensing) - Frequency: 50 or 60 Hz, auto-sensing - Overload (Normal operation): * 108% +/-5% - 150% +/-5%: Load transfers to Fault mode after 30 sec * 150% +/-5% - 200% +/-5%: Load transfers to Fault mode after 300 msec. * >200% +/-5%: Load transfers to Fault mode after 20 msec. - Overload (Bypass mode): * 100% +/-5% - 130% +/-5%: UPS switch to Fault after 20 * 130% + /-5% - 150% +/-5%: UPS switch to Fault after 2 * 150% +/-5% - 200% +/-5%: UPS switch to Fault after 15sec. * >200% +/-5%: UPS switch to Fault after 140 ms. - Overload (Battery mode): * 108% +/-5% - 150% +/-5%: UPS switch to Fault after 30 sec. * 150% +/-5% - 200% +/-5%: switch to Fault after 300 ms. * >200% +/-5%: UPS switch to Fault after 20 ms. - Output waveform: Sinusoidal - Harmonic distortion: * <3% THD with linear load * <5% THD with non linear load - Switching time: * Online mode: 0 ms * ECO mode : 10ms max. - Crest Factor: 3 a 1 ELECTRIC - 2× IEC C13-10A + 1 Shuko - Cable: IEC320 C14-10A STANDARD AND OPTIONAL COMMUNICATION PORTS - Optional card to insert into the slot: SNMP card or clean contacts Relay - Standard communication port: RS232 (DB-9): 2400bps USB DIMENSIONS / WEIGHT - Dimension (W×D×H): 440×430×86.5 mm - Weight: 15.7 kg ENVIRONMENT AND SAFETY - Overvoltage suppression: * EN 61000-2-2 * EN 61000-4-2, level 4 * EN 61000-4-3, level 3 * EN 61000-4-4, level 4 * EN 6100-4-5, level 4 Criteria A - EMC certification: CE per IEC/EN 62040-2, Classe B - EMC (Emission): IEC 62040-2:ed2:2005 / EN 62040-2:2006 - Safety: IEC 62040-1-1, IEC 60950-1 - Marking: CE, CB - Operating Temperature: 0C to 40C (32F to 104F) with variation according to altitude * internal thermal sensor shall switch the load to bypass in case of overtemperature - Humidity: 0–90% without condensation - Operating Altitude: Up to 3.000 meters (9.843 ft) above sea level - Noise level: <55 dBA a 1 metro typ - Leakage current: <1.5 mA

- FSP Champ Rack Series is the high density version of double-conversion online UPS with a output power factor 0.9. - It’s designed in small cabinet with microprocessor controller. - It also has USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relate contact cards. Specifications - Topology: On-line Single Phase - Capacity: 2000 VA / 1800W - Typical Recharge Time (up to 90% capacity): 4 hours - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 40Hz ~ 70Hz - Input Voltage Range: 120-300 VAC - Output Outlet: 3 schuko - Output Voltage: ± 1% (Batt. Mode) - Output Frequency Range: 47.5 Hz ~ 52.5 Hz or 57Hz ~ 63 Hz (Synchronized Range) 50 Hz ±0.25 Hz or 60 Hz ±0.3 Hz (Batt. Mode) - Wave Form: Sine wave - Battery: 4pcs 12V 9Ah inside - Battery Type Number: 12V / 9Ah x 4 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Network Ports: USB, RS-232 - Operating Environment / Humidity: 20-90 % RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB 1 Meter - Dimensions: 410x438x88 - Weight: 1900g - OS: Supports Windows® 98/XP/2000/Vista/7/8/10, Windows® Server 2000/2003/2008/2012/2016, Linux, and MAC

- FSP Custos 9X+ Series is ideal for medium-density power protection demand. It provides Rack/Tower to be fit in diverse environment. Despite its compact footprint, Custos 9X+ incorporates internal battery packs which can be accessed via front panel for easy maintenance. IT personnel can manage equipment well from learning intuitive information via LCD display. The application is suitable for networking, telecom, server and mission/critical applications. Features - Capacity: 2000VA/1800W - Power Factor (PF): 0.9 - Wave Form: Sine wave - Battery: 12V/9Ah, 4pcs inside - Intelligent Slot: SNMP, AS400, RS485-Modbus - Port for External Battery Pack: Yes - Network Ports: USB, RS-232, EPO - Box contents: UPS, user manual, software CD, EU cable, USB cable, tower stands, mounting ears screws Specifications - MODEL: Custos 9X+ 2K - CAPACITY: 2000 VA / 1800 W - PHASE: Single phase with ground INPUT - Voltage Range: • 110-300 VAC ± 5 % at 50% load; • 160-300 VAC ± 5 % at 100% load - Nominal Voltage: 200/208/220/230/240 VAC - Frequency Range: 40Hz~70Hz - Power Factor: ? 0.99 Nominal Voltage (100% load) - Harmonic Distortion (THDi): ? 5% nominal input voltage OUTPUT - Output Voltage: 200/208/220/230/240 VAC - AC Voltage Regulation (Batt. Mode): ± 1% - Frequency Range (Batt. Mode): 50 Hz or 60 Hz ± 0.1 Hz - Transfer Time: Zero - Waveform (Batt. Mode): Pure Sine Wave - Current Crest Ratio: 3:1 (max.) - Harmonic Distortion: ? 2% THD (Linear Load); ? 4% THD (Non-linear load) - Frequency Range (Synchronized Range): 57~63 Hz or 47~53 Hz or EFFICIENCY - Battery Mode: 86% - ECO Mode: 97% - AC Mode: 91% BATTERY - Battery Type: 12 V / 9 AH - Charging Current (max.): 1.5 A - Charging Voltage: 54.8 VDC ± 1% - Numbers: 4, 6 - Typical Recharge Time: 4 hours recover to 90% capacity INDICATORS - LCD Display: Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators ALARM - Battery Mode: Sounding every 5 seconds - Low Battery: Sounding every 2 seconds - Overload: Sounding every second - Fault: Continuously sounding ENVIRONMENT - Operating Humidity: 20~90% RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB 1 Meter PHYSICAL - Dimension, D X W X H (mm): 630 x 438 x 88 [2U] - Net Weight (kgs): 26,5 MANAGEMENT - Optional SNMP: Power management from SNMP manager and web browser - Smart RS-232/USB: Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8/10, Linux, and MAC

Specifications - Warranty: 24 months (12 months for battery) - Power: 3000VA (2700W) - Surge protection: Yes - Type: Online - Overcharge protection: Yes - The possibility of return: Up to 30 days - Product code: UPS15 - Manufacturer: Green Cell - Size: 440 x 86.5 x 720 mm - Weight: 23 - Input Voltage: 110-290V - Input frequency: 45-65Hz (detected automatically) - Output Voltage: 200/208/220/230/240V AC - Output frequency: 50Hz / 60Hz - Sockets: 6x IEC320 C13-10A (divided into two segments with the possibility of assigning separate settings) - Batteries: 6x 12V 9Ah battery - battery life at 100% load of 3-5min (displayed on the LCD panel

- Clippers series is a premium featured online double conversion UPS with Rack/Tower design and high efficiency to reduce customer‘s total cost of ownership. - The internal hot-swappable battery increases system reliability and reduces MTTR; the parallel function is designed for future equipment expansion. - Its special firmware design can adapt to various applications like laser printers and ultrasound devices and supports long backup time with battery monitoring. Features - True double conversion - Output power factor 1 - Rack/Tower 2 in 1 design with rotatable LCD - Super Charger up to 8A - Output voltage regulation < 1% - Higher output crest ratio 3:1 - 50Hz/60Hz frequency converter mode - Programmable power management outlets - Emergency power off function (EPO) - Hot-swappable battery design - ECO mode for energy saving - Support for laser printers and ultrasound systems - Full-time over-voltage cut-off and surge protection - High power factor charger with low ripple current - Low input THDi to reduce power system pollution - Adjustable charging current via LCD panel - Smart battery charger design to optimize battery performance - Genset compatible Specifications - Topology: On-line Single Phase - Capacity: 2000 VA / 2000W - Typical Recharge Time (up to 90% capacity): 3 hours - Power Factor: ? 0.99 @ Nominal Voltage (100% load) - Input Frequency: 40Hz ~ 70Hz - Input Voltage Range: 160-300 VAC ±5% - Output Voltage: ± 1% (Batt. Mode) - Output Frequency Range: 46 Hz ~ 54 Hz or 56Hz ~ 64 Hz (Synchronized Range) 50 Hz or 60 Hz ±0.1 Hz (Batt. Mode) - Wave Form: Pure Sinewave - Battery: 12V/9Ah, 4 pcs inside - Battery Type Number: 12V / 9Ah x 4 - Intelligent Slot: SNMP, AS400, RS485-Modbus - Network Ports: USB, RS-232, EPO - Operating Environment / Humidity: 20-90 % RH @ 0- 40°C (non-condensing) - Noise Level: Less than 50dB @ 1 Meter - Dimensions: 438 x 88 x 510 - Weight: 19 500g - OS: Supports Windows® 98/XP/2000/Vista/7/8/10, Windows® Server 2000/2003/2008/2012/2016, Linux, and MAC